Equipment Rental

• Effective sensor size 23.10 x 12.99 millimeter (super 35)
• Shooting resolutions 6144 x 3456 (6K) up to 50 fps/ 6144 x 2560 (6K 2.4:1) up to 60 fps/ 5744 x 3024 (5 7K 17 9) up to 60 fps/ 4096 x 2160 (4K DCI) up to 60 fps/ 3840 x 2160 (Ultra HD) Up To 60 fps/ 3728 x 3104 (3 7K 6 5 anamorphic) up to 60 fps/ 2868 x 1512 (2 8K 17 9) up to 120 fps/ 1920 x 1080 (HD) Up To 120 fps
• Maximum sensor frame rate Dependent on resolution and codec selected Project frame rates of 23.98, 24, 25, 29, 97, 30, 50, 59.94 and 60 FPS supported off-speed frame rates up to 60 fps in 6K 2.4:1 120 fps in 2.8K 17:9 and 1080H
• Video inputs None/ video outputs 1x HDMI type A

• 1x Blackmagic Pocket Cinema Camera 6k
• 1x Sigma 18-35mm T2 High-Speed Zoom Lens (Canon EF)
• 1x Tilta Camera Cage for Blackmagic Design Pocket Cinema Camera 4K/6K (Basic Kit, Tilta Gray)
• 1x Noga Cine Arm DG Hold-It Arm
• 1x B+W 82mm XS-Pro Digital ND Vario MRC-Nano Filter
• 1x D-Tap Male to 2-Pin Wei-Pu Male Right-Angled DC Jack Cable
• 1x Kopul Coiled 3-Pin XLR-M to Angled 3-Pin XLR-F Cable (3 to 18″, Black)
• 1x Blackmagic Design Set of 2 Mini XLR to XLR Audio Cables for Video Assist 4K (19.5″)
• 1x Think Tank Photo Cable Management 10 V2.0
• 1x Tilta DSLR Power Supply System with 15mm Rod Adapter & LP-E6 Dummy (V-Mount)
• 1x Tilta 15mm LWS Baseplate Type I (Tactical Gray)
• 2x Tilta Threaded 15mm Rod (Black, 12″, Single)
• 1x SmallHD 702 Touch 7″ On-Camera Monitor
• 1x CineBags CB92 Monitor Pack (Charcoal with Orange Webbing)
• 2x Elvid Slim SDI Cable RG-179 (2′) 
• 2x ikan Slim High-Speed Mini-HDMI to HDMI Cable (Yellow, 3′)
• 2x SHAPE D-Tap to 2.1mm Barrel Power Cable
• 1x Think Tank Photo Red Whips Bungee Cable Ties V2.0
• 1x SmallHD Sun Hood for 703 UltraBright Monitor
• 1x Manfrotto 357PLV-1 Sliding Plate with 1/4″-20 & 3/8″-16 Screws
• 2x Blackmagic Design Body Cap for Canon EF
• 1x Pelican 1510 Carry-On Case with Foam Set (Black)

• Brand: Blackmagic Design
• Model: Blackmagic Design Pocket Cinema Camera 6K with EF Lens Mount
• Replacement Value: $9,944.00

• Effective sensor size 23.10 x 12.99 millimeter (super 35)
• Shooting resolutions 6144 x 3456 (6K) up to 50 fps/ 6144 x 2560 (6K 2.4:1) up to 60 fps/ 5744 x 3024 (5 7K 17 9) up to 60 fps/ 4096 x 2160 (4K DCI) up to 60 fps/ 3840 x 2160 (Ultra HD) Up To 60 fps/ 3728 x 3104 (3 7K 6 5 anamorphic) up to 60 fps/ 2868 x 1512 (2 8K 17 9) up to 120 fps/ 1920 x 1080 (HD) Up To 120 fps
• Maximum sensor frame rate Dependent on resolution and codec selected Project frame rates of 23.98, 24, 25, 29, 97, 30, 50, 59.94 and 60 FPS supported off-speed frame rates up to 60 fps in 6K 2.4:1 120 fps in 2.8K 17:9 and 1080H
• Video inputs None/ video outputs 1x HDMI type A

• 1x Blackmagic Pocket Cinema Camera 6k
• 1x Sigma 50-100mm T2 High-Speed Zoom Lens (Canon EF)
• 1x Tilta Camera Cage for Blackmagic Design Pocket Cinema Camera 4K/6K (Basic Kit, Tilta Gray)
• 1x B+W 82mm XS-Pro Digital ND Vario MRC-Nano Filter
• 1x Noga Cine Arm DG Hold-It Arm
• 1x Think Tank Photo Cable Management 10 V2.0
• 1x PortaBrace CARA-BRNZ Carabiner with Flashlight
• 1x Kopul Coiled 3-Pin XLR-M to Angled 3-Pin XLR-F Cable (3 to 18″, Black)
• 1x D-Tap Male to 2-Pin Wei-Pu Male Right-Angled DC Jack Cable
• 2x RODE SC7 3.5mm Right-Angle TRS to 3.5mm Right-Angle TRRS Coiled Adapter Cable
• 1x Blackmagic Design Set of 2 Mini XLR to XLR Audio Cables for Video Assist 4K (19.5″)
• 1x Tilta DSLR Power Supply System with 15mm Rod Adapter & LP-E6 Dummy (V-Mount)
• 1x Tilta 15mm LWS Baseplate Type I (Tactical Gray)
• 2x Tilta Threaded 15mm Rod (Black, 12″, Single)
• 1x Manfrotto 357PLV-1 Sliding Plate with 1/4″-20 & 3/8″-16 Screws
• 1x CineBags CB92 Monitor Pack (Charcoal with Orange Webbing)
• 1x SmallHD 702 Touch 7″ On-Camera Monitor
• 1x ikan Slim High-Speed Mini-HDMI to HDMI Cable (Yellow, 3′)
• 1x SHAPE D-Tap to 2.1mm Barrel Power Cable
• 1x Pelican 1510 Carry-On Case with Foam Set (Black)

• Brand: Blackmagic Design
• Model: Blackmagic Design Pocket Cinema Camera 6K with EF Lens Mount
• Replacement Value: $9,833.00

Mixing the quality and advantages of a full-frame sensor with an especially sleek and portable design, the silver Sony a7C offers the hybrid recording capabilities, 24.2MP Exmor R BSI CMOS sensor, and intelligent AF performance you would expect from an Alpha camera but with a form factor for all-day, everyday carry.

• 1x Sony a7C Mirrorless Camera (Silver)
• 1x Sony NP-FZ100 Rechargeable Lithium-Ion Battery (2280mAh)
• 1x Sony FE 24-70mm f/2.8 GM Lens
• 1x B+W 82mm UV-Haze #010 MRC Basic Filter
• 1x USA GEAR DSLR Camera Bag (Southwest)

Brand: Sony
Model: Sony a7C Mirrorless Camera (Silver)
Replacement Value: $3,382.00

Constructed of lightweight yet strong carbon fiber, this MB-T12 Clip-On Matte Box from Tilta is designed to fit lenses with a 114mm front diameter. This versatile matte box can also be mounted using the included 15mm LWS rod bracket or a separately available back of a different size.

• 1x Tilta 3-Stage 4 x 5.65″ Carbon Fiber Clip-On Matte Box (114mm Back)
• 1x Tilta 15mm LWS Rod Adapter for MB-T12 Matte Box
• 1x Tilta Carbon Fiber Top Flag for MB-T12 Matte Box
• 3x Tilta 4 x 4.56″ Filter Tray for MB-T12
• 5x Hard Matte

Brand: Tilta
Model: 3-Stage 4 x 5.65″ Carbon Fiber Clip-On Matte Box (114mm Back)
Replacement Value: $299.00

Add a professional UHD 4K monitor to your DIT station, video village, or studio with the Cine 18″ 4K High-Bright Production Monitor from SmallHD. Featuring the updated SmallHD OS4.1, the monitor provides a crisp 4K image with 3840 x 2160 resolution, 10-bit (8+2 FRC) color intelligence, 1300:1 contrast ratio, and 1100 cd/m² brightness for use outdoors.

• 1x Custom Innerspace Case
• 1x 6′ BNC Cable
• 1x 35′ BNC Cable

• Brand: SmallHD
• Replacement Value: $7,000.00

The Sachtler Cine 7+7 FT MS flowtech 100 Tripod System combines the Cine 7+7 fluid head with the lightweight, carbon fiber flowtech 100 MS tripod. Supporting up to 48 lb, this bundle offers speedy setup, a wide payload range, and stable support for lighter cine-style camera rigs. A SpeedLevel clamp for quick head leveling, a carrying handle, and a padded bag round out this kit.

• 1x Sachtler Tripod System
• 1x Bag
• 1x Plate

Brand: Sachtler
Model: Cine 7+7 HD MCF Tripod
Replacement Value: $12,350.00

The Miller Air Alloy Tripod System is a lightweight system built for indoor and outdoor shooting conditions for both video and photo applications. It includes aluminum alloy tripod legs designed for quick setups and breakdowns, and a pan and tilt fluid head offering constant drag in all temperature ranges. It also includes a quick-release camera plate, pan handle, and weatherproof, padded soft carry case. The system features a 4.4 lb – 11 lb payload range.

• 1x Miller Air Alloy Tripod System
• 1x Miller Solo DV Aluminum Tripod with 75mm bowl- Supports up to 44 lb (20 kg)
• 1x Air Fluid Head
• 1x Pan Handle
• 1x Miller Sliding Camera Plate
• 1x Miller 1/4″-20 Screw & Location Pin Adapter
• 1x Weatherproof, Padded Airsoft Carry Case

Brand: Miller
Model: Miller Air Alloy Tripod System
Replacement Value: $1,052.00

The versatile Ronin 2 gimbal from DJI is suitable for use either handheld or mounted in a variety of ways including onto a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds.

• 1x DJI Ronin 2 3-Axis Handheld/Aerial Stabilizer
• 1x Gimbal
• 1x Grip
• 1x Remote Controller
• 2x TB50 Intelligent Batteries
• 1x Dual TB50 Battery Mount
• 1x Battery Charger
• 1x Quad Charging Hub
• 1x Battery Charger Power Cable
• 1x Ronin 2 Power Hub
• 1x Protective Case
• 1x Hex Tool
• 1x Camera Top Cross Bar
• 1x Camera Base Plate
• 1x Accessory Mount
• 2x 15mm Rod
• 1x 15mm Focus Rod Mount
• 1x Ronin 2 Universal Mount
• 1x Top Mounting Block
• 1x MotionBlock
• 1x ARRI ALEXA Mini Power Cable
• 1x ARRI ALEXA Mini Start/Stop Cable
• 1x RED Power Cable
• 1x RED RCP Control Cable
• 1x Ronin 2 Power Cable
• 1x 2-Pin Power Cable
• 1x DC Power Cable
• 1x Triple D-Tap Breakout Box
• 1x SDI-In Cable
• 1x SDI-Out Cable
• 1x USB Type-C Data Cable
• 1x UART to D-BUS Cable

Brand: DJI
Model: DJI Ronin 2 3-Axis Handheld/Aerial Stabilizer
Replacement Value: $8,399.00

Use the Ready Rig GS Stabilizer + ProArm Kit to transfer the weight of a gimbal-mounted camera away from an operator’s arms and shoulders. By redistributing the load to the user’s hips and core, this rig enables you to extend your shooting time and lessens operator fatigue. It also reduces the bounce motion sometimes seen during handheld gimbal shots. The Ready Rig GS Stabilizer works with any gimbal in standard or underslung mode.

• 1x Ready Rig GS Stabilizer + ProArm Kit with Case
• 2x Shoulder Mounts
• 2x Carbon Fiber Support Rods
• 2x Rear Tension Cables
• 2x Universal Gimbal Attachments
• 1x Carrying Case

Brand: Ready Rig
Model: Ready Rig GS Stabilizer + ProArm Kit with Case
Replacement Value: $3,299.99

Designed with the DSLR/mirrorless shooter that uses a motorized gimbal, the Easyrig Minimax STABIL Light Gimbal/Camera Support System is great for removing bounce from walking or running while helping you shoot for extended periods without fatigue. The STABIL light is based on the Easyrig STABIL, though engineered for smaller payloads, and it helps reduce vertical vibration and movement as you track your subjects. It includes the Easyrig Vest, Upgraded Minimax Powerpack, and STABIL Light.

• 1x Easyrig Minimax STABIL Light Gimbal/Camera Support System
• 1x Vest
• 1x Powerpack
• 1x STABIL Light
• 1x Carrying Bag

Brand: Easyrig
Model: Easyrig Minimax STABIL Light Gimbal/Camera Support System
Replacement Value: $2,445.00

Ideal for documentaries, news, events, and more, the Easyrig Minimax is designed for productions requiring extensive handheld camerawork with cameras weighing 4.4 to 15.4 lb. Rather than uncomfortably handholding your camera and supporting the weight with your arms, the Minimax redistributes the weight of your camera setup through the body harness. Taking the weight off your arms enables you to hold the camera steady for longer periods of time while reducing fatigue.

• 1x Easyrig Minimax
• 1x Carrying Bag

Brand: Easyrig
Model: Easyrig Minimax
Replacement Value: $1,259.00

The Tilta Nucleus-M Wireless Lens Control System Partial Kit IV contains the essential elements for pulling focus and iris wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, two Nucleus-M motors, two removable lens belts (DSLR Lens Follow Focus Adapters), two motor power cables, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger unit. The system enables an AC to pull focus and iris on a prime lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belts to add gears to your lens.

• 1x Tilta Nucleus-M FIZ Hand Unit
• 2x Tilta Nucleus-M FIZ Lens Control Motor
• 1x 19mm Rod Adapter
• 1x 19mm to 15mm Bushing
• 2x Tilta DSLR Lens Follow Focus Adapter
• 1x Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable
• 1x Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable (21.65″)
• 2x Tilta Nucleus-M Follow Focus Marking Disk
• 1x Tilta Lanyard for Nucleus-M FIZ Hand Unit
• 1x Tilta Nucleus-M Battery Charger
• 1x AC Power Cable

Brand: Tilta
Model: Nucleus-M Wireless Lens Control System Partial Kit IV
Replacement Value: $929.00

The DJI RS3 Pro Gimbal Stabilizer Combo has been redesigned to be sleeker and more powerful than the Ronin RS 2 gimbal, with its carbon fiber body weighing only 3.3 lb and a payload of up to 10 lb. This compact gimbal is tough enough to support and stabilize midsize cameras such as the Sony FX6 or Canon C70 with a 24-70mm zoom lens attached. With a larger full-color OLED display, a new fine-tuning knob, and greater stability, the RS 3 Pro can become an essential part of your professional camera kit. The Combo kit includes additional essentials such as an updated focus motor, a motor rod mount kit with gear strip, a briefcase handle, a BG30 grip, a lower extended quick release plate, a wireless Ronin Image Transmitter, a phone holder, USB multicamera control cables, multiple HDMI cables, power cables, and a lens-fastening strap.

• 1x DJI RS 3 Pro Gimbal Stabilizer Combo
• 1x DJI Ronin BG30 Grip for RS 2 & RS 3 Pro Gimbals
• 1x Lens Support
• 1x Extended Grip/Tripod
• 1x Quick Release Plate (Arca-Type/Manfrotto)
• 1x Lower Extended Quick Release Plate
• 1x DJI Briefcase Handle for RS Series
• 1x DJI Ronin RavenEye Image Transmission System for DJI Stabilizers
• 1x DJI RS Focus Motor (2022)
• 1x Focus Motor Rod Mount Kit Combo
• 1x Focus Gear Strip
• 1x Phone Holder
• 1x USB Power Cable (7.9″)
• 1x USB Type-C Charging Cable (15.7″)
• 1x USB Type-C Multi-Control Cable (11.8″)
• 1x Mini-HDMI to HDMI Cable (7.9″)
• 1x Mini-HDMI to Mini-HDMI Cable (7.9″)
• 1x Mini-HDMI to Micro-HDMI Cable (7.9″)
• 1x Carry Case
• 1x Screw Kit
• 3x Hook-and-Loop Strap

Brand: DJI
Model: DJI RS 3 Pro Gimbal Stabilizer Combo with Hard Case Kit
Replacement Value: $1,298.95

The Tokina 4 x 5.65″ PRO IRND 0.6 Filter is compatible with filter holders that can accommodate filters that are 5.65″ wide and 4mm thick. It is an ND filter with a 4x filter factor that provides a 2-stop exposure reduction. This filter’s 0.6 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By slowing your exposure time or increasing your aperture, you are able to control depth of field and convey movement more easily. Neutral density filters are intended to not affect the coloration of the image and are ideal for pairing with other filters.

• 1x Padded pouch included for storage and transport.
• Compatible with filter holders that can accommodate filters that are 4″ wide and 4mm thick.
• 0.6 neutral density filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required.
• Providing a 2-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily.
• Filter does not affect coloration of the image and is ideal for use with other filters.
• One ACCU-ND Vapor Deposition layer attenuates infrared light, as well as visible wavelengths, to maintain color neutrality and suppress color casts due to increased exposure times.
• Constructed from optical glass for clarity.

Brand: Tokina
Model: 4 x 5.65″ PRO IRND 0.6 Filter (2-Stop)
Replacement Value: $449.00